Tire size
24.5-32 Tractor Tires
24.5-32 is a bias farm tractor rear tire size with R-1 tread, used for heavy tractor.
New and used options. Tell us the quantity, your machine and where to ship.
24.5-32 tires listed now
-
New
15 sizes Galaxy Earth-Pro R-1 Bias Tractor Tire
From $401.00
-
New
14 sizes Goodyear Dyna Torque II R-1 Bias Tractor Tire
From $475.00
Not what you need? We source more 24.5-32 tires than we list. Add the size to your quote list above.
What “24.5-32” means
- 24.5Section width: 24.5 in (622 mm)
- -Bias-ply construction
- 32Rim diameter: fits a 32-inch wheel
Where 24.5-32 is used
| Type | Tread | Construction | Typical use |
|---|---|---|---|
| Farm Tractor Rear | R-1 | Bias | Heavy tractor |
Buying 24.5-32 tires
24.5-32 is a large drive tire for combines, and it is also used on some big tractors and heavy equipment. It is about 24.5 inches (622 mm) wide on a 32-inch rim. The 32-inch rim is found mainly on combines, where the drive tires carry the weight of the machine, the header and a full grain tank across soft fields.
Tread choices
- R-1: standard farm lug for normal harvest conditions.
- R-2: very deep lugs for rice, cane and wet, sticky ground where standard lugs pack up.
A radial version, 24.5R32, is also made. It puts a longer footprint on the ground and rides better on the road between fields, which counts on a heavy machine.
What to check
- Ply rating or load index: a full grain tank adds a lot of weight on the drive axle. Match or exceed your current tires.
- Duals: some combines run dual drive tires. Tell us if yours does, so the tires match.
- Clearance: if you are changing size, check the clearance at the frame and the transport width.
- Freight: tires this size ship on freight. Include the delivery location so we can quote it.
- Used tires: good used combine tires save a lot. Ask for the tread depth, the date code and photos of both sidewalls and the bead area.
Other combine and high-flotation sizes include 23.1-26 and 28L-26. Send the quantity and delivery location for a quote.
What do 24.5-32 tires cost on our site?
We list 2 models in 24.5-32. 2 have a listed price, from $2,543 (Goodyear Dyna Torque II) to $2,863 (Galaxy Earth-Pro R-1) per tire, with a median of $2,703. Prices are per tire in US dollars and change with stock and season.
| Model | Tread | Load / ply | Price per tire |
|---|---|---|---|
| Goodyear Dyna Torque II | R-1 | – | $2,543 |
| Galaxy Earth-Pro R-1 | R-1 | 12 ply | $2,863 |
How tall is the 24.5-32 tire?
The nominal overall diameter is about 73.7 in (1,871 mm), which gives a rolling circumference near 231 in (5,877 mm). That figure is an estimate that assumes an 85% aspect ratio, the usual rule for old inch sizes. Real tires vary by make and load, so treat it as a guide and use the tire diameter calculator or the lead-lag calculator before you change size on a front-wheel-assist tractor.
Is 24.5-32 a radial or a bias tire?
It is a bias-ply size. The dash in the size marks bias construction, which costs less and has stiffer sidewalls. See the radial vs bias guide.
Brands we source
- Michelin
- Bridgestone
- Goodyear
- Trelleborg
- BKT
- Firestone
- Titan
- Alliance
- Mitas
- Continental
- CEAT
- Yokohama Off-Highway
- Nokian Tyres
- Cultor
- Galaxy
- Carlisle
- Petlas
- Ascenso
- Maxam
- Ozka
Brand availability varies by size. Ask us which brands we can supply in 24.5-32, new or used.